This solidly built 2U chassis also hits the spot for storage capacity. The front panel has room for up to twelve LFF hard disks in hot-swap carriers, allowing it go up to 36TB using 3TB SATA III drives.
The motherboard's embedded controller provides two SATA III and four SATA II onboard interfaces. It supports mirrors, stripes and RAID-5 in Windows, but Boston has eschewed this in favour of a Supermicro SAS SMC2108 RAID PCI-e card.
Boston has also fitted a SAS 2/SATA III backplane to the server and combining its integral SAS expanders with the RAID card not only brings all 12 drive bays into play, but also adds RAID-6 and -60 to the array equation.
The server includes redundant 920W hot-plug supplies and has plenty of expansion potential.
For this review sample, Boston has focused on a low price and high capacity rather than performance, so the server came with a quartet of 1TB Western Digital RE4 Enterprise SATA II drives.
The internal layout is good, with plenty of clear access for maintenance and upgrades. A large plastic shroud covers the processors and memory sockets, and all chassis cooling is managed by three large hot-plug fans behind the disk backplane that don't generate much noise.
Plenty of network connections are also available, thanks to four embedded Gigabit ports, plus there's room to add more as even with the RAID card in residence, there are still five PCI-e Gen3 slots of various speeds.
Note that the new Sandy Bridge-EP architecture has the IOH (I/O Hub) moved on-chip and now provides forty PCI-e lanes per socket. This means the PCI-e slots are split into two groups on the motherboard and so both CPU sockets must be populated if all of them are to be used.
The Value Series 380 G8 isn't a great choice for virtualisation, as although it has a huge memory capacity, there's only one internal USB port for booting into a hypervisor. However, it does have an onboard power connector next to its SATA ports specifically for a SATA DOM, so it could easily run apps such as the Open-E data storage software for NAS, iSCSI and FC SAN services.
